The new phase control device is optimized for very low on-state voltage, when compared to similar devices in the same voltage class, with a forward volt drop of 2.0 Volts at 1000A. This new thyristor is part of IXYS’ global strategy of introducing power semiconductors that improve the energy efficiency of electrical power systems. The low conduction loss makes the device ideal for line frequency applications such as front-end rectification as well as all controlled rectifier applications up to a few hundred hertz. Other applications for which the device is ideally suited include: DC drives, load commutated inverters and excitation equipment, power and motor control for electrical trains, high power generators, UPS’s and renewable energy applications, including solar power generators and wind turbine generators.
The optimization of the conduction losses achieves lowest system losses and minimizes the cooling requirements for applications up to 2.3kV line voltage. At higher system voltages, where devices are required to operate in series, Westcode recommends the use of its comprehensive range of medium voltage thyristors, such as the K0769. The new phase control device is also ideal for use in crowbars, particularly for traction, in applications up to 1500V DC.
The devices are available in two voltage classes and two package options: N0845NC600 & N0845NC650, which are rated at 6.0kV & 6.5kV, respectively, and housed in a 26mm (1”) thick package and N0845NG600 & N0845NG650, which are rated at 6.0kV & 6.5kV, respectively, and housed in a 35mm (1.38”) thick package.
IXYS is a US-based manufacturer of power semiconductor and IC for power conversion applications.
