The rectifier delivers a low forward volt drop (VF) of 0.7V at 10A rated current and a junction temperature of 125oC. Coupled with an off board package height of 1.1mm, half that of Dpak, the SBR10U200P5 enables designers to lessen the form factor and increases the power density of compact power supplies for end applications such as notebook power adapters, universal chargers and telecom power supplies.
The characteristics of the SBR10U200P5 make it best for use as an output diode in power supply output stages, as a catch diode in Buck regulator circuits, as a freewheeling diode in motor drive circuits and also as a boost diode. With its patent-pending, flat lead frame and heat-sink solder pad, the rectifier results in higher power dissipation and surge capabilities in a compact, low profile package. With a maximum rated junction temperature Tj of 175oC and an avalanche rating several times greater than that offered by a competing Schottky diode solution packaged in Dpak, the SBR10U200P5 enables snubber circuits to be removed from power supply outputs, allowing designers to reduce end-product cost and simplify their designs.
